Cessna 182

B19 same as B23Sheet metal work is as much an art as a skill. Most of the time there is very little to guide you other than a picture, some references in the maintenance manual or parts manual. And of corse the AC 43.13 to reference to. What also counts I’d how the repair or…

There was a time I believe that the more engine rubber isolators the better but today everyone should have their engine balanced to their propeller. This is usually done by a propeller shop or a local with the proper equipment. When this is done the difference can be life changing, I also feel it makes…

 After removing the tail we found that an earlier replacement of the tail bulkheads with a later model 180 bulkhead, probably because of the plane going over on its back, was not done very well…….

Like many things when it gets old the dents start to show and the only option is a face lift. When this is done it is almost like new, your wife may not notice but you will. 

 Everything can be repaired but some things take longer than others. We took on this job with an idea of how much time but that usually changes as you disassemble. We were lucky that the nose gear survived and the firewall was still in good shape, it does have a few creases but still serviceable….

Replaced both left and right horizontal tips with Mc Farlane tips using 8 32 screws in place of rivets. The idea is that you can easily change out the tip if damaged, one thing is that if you operate a seaplane you need to put some corrosion protection on the nut plates and screws on…